[tyb51]

Maybe it was just some wierd bug after osrs update, 2 days later seems to be okay

thank you
 
@tyb51
Hello man i got some issues that you could take a look at:

Bug: if you have a single item on the bank and use the bank withdrawal node with the option to withdraw all it gets stuck(link since i cant upload to forum, also this bug is very old):

bandicam 2020-12-01 10-05-47-675

Request:
Add the option to withdraw x items from the bank using the bank withdrawal node without using the VisualRM preset option, because without it does not work, i also tried using Interface condition to try the same thing in several ways and none worked(not shown in the video, because it would be too long):

bandicam 2020-12-01 10-39-00-822

Why this? If for example i have a item with charges on the inventory when i try to use visualrm it then tries to get another item with the same charges because the item name changes because it has less charges

Request2: add the option to logout, or and hop world(when logged out) can be very useful when a player shows up on the wilderness.

Thank you and have a nice day

I can try to add the separate function. A tip tho is in the VRM preset builder: double click the name of an item and you can edit it. You can remove the charge so it will try to match the closest equivalent. (E.g. double click "Stamina potion (4)", change it to "Stamina potion (" and it will withdraw the first Stamina pot of any charge in your bank. Just make sure to have them correctly ordered in you bank ).

For now you can logout by using break button with break > 1 minute I think. I will think about adding it specifically.

 

[luis miguel]

I can try to add the separate function. A tip tho is in the VRM preset builder: double click the name of an item and you can edit it. You can remove the charge so it will try to match the closest equivalent. (E.g. double click "Stamina potion (4)", change it to "Stamina potion (" and it will withdraw the first Stamina pot of any charge in your bank. Just make sure to have them correctly ordered in you bank ).

For now you can logout by using break button with break > 1 minute I think. I will think about adding it specifically.

Hell @tyb51 thanks for the tip on the visualrm preset I can get it to work, about the logging out in the wilderness, some people just wait there for you to log back in, so would it be possible to eventually add the option to worldhop while logged out? Like some bots do.

Thank you

 

[adenahmed]

Howdy there! Just trying this bot for the first time and it seems awesome! I'm starting to get the hang of it. My only issue is that my character doesn't want to travel to the bank, or more accurate, the area within the bank. I am trying to make it travel from south-east mining site in Varrock to the eastern bank inside Varrock. I have set it up to check if the backpack is full and if it is, check if the Banking NPC is visible, if not - go travel to the banking area.

However, it seems that the distance between the mining site and bank is too far big. When I manually walk closer, the bot manages to do the rest. It also fails walking back to the mining site.

I am trying to find out if there is anything I could do? I also tried to make it make several stops, so it walks to a certain point followed by the next, eventually getting to the bank, but I can't seem to make it work without it returning to the first stop.

Any help is highly appreciated, would love to use this bot fulltime.

 

[tyb51]

Howdy there! Just trying this bot for the first time and it seems awesome! I'm starting to get the hang of it. My only issue is that my character doesn't want to travel to the bank, or more accurate, the area within the bank. I am trying to make it travel from south-east mining site in Varrock to the eastern bank inside Varrock. I have set it up to check if the backpack is full and if it is, check if the Banking NPC is visible, if not - go travel to the banking area.

However, it seems that the distance between the mining site and bank is too far big. When I manually walk closer, the bot manages to do the rest. It also fails walking back to the mining site.

I am trying to find out if there is anything I could do? I also tried to make it make several stops, so it walks to a certain point followed by the next, eventually getting to the bank, but I can't seem to make it work without it returning to the first stop.

Any help is highly appreciated, would love to use this bot fulltime.

Normally this should be very easy with web travel. However the web has been down for several months now. The cleanest option is to use the new support for custom webs. You need to use another bot first called custom Web builder or something. Then just run from point a to point B while regenerating the web everytime a a region loads (the little lag spike you notice in game). You could try enable auto generate while walking your path, but that often crashers for me.
Then save that file as .nav file and load it in VRM in the inspector tab.
Not the easiest thing but see if you can figure it out

 

[adenahmed]

Normally this should be very easy with web travel. However the web has been down for several months now. The cleanest option is to use the new support for custom webs. You need to use another bot first called custom Web builder or something. Then just run from point a to point B while regenerating the web everytime a a region loads (the little lag spike you notice in game). You could try enable auto generate while walking your path, but that often crashers for me.
Then save that file as .nav file and load it in VRM in the inspector tab.
Not the easiest thing but see if you can figure it out

Good morning Tyb! I've just tried what you said. I downloaded the bot and tried both auto-mapping and doing it by hand. Saved it as a custom name like Fullrun.nav and tried web.nav. When using the name web.nav, it even showed a sweet png of the correct area, where a clear path could have been drawn from the picture.

However, it still failed to actually move at all until I went manually ran closer myself. I tried restarting the program several times and switching between the Fullrun.nav and web.nav, even though they are the same file with different names. By looking at the debugger option, it shows a red circle around both traversal nodes, both when trying to walk to the bank and back to the mining site,

Is there anything else I am missing or anything else I could do? Thanks for the quick reply btw, I appreciate it!

 

[tyb51]

Good morning Tyb! I've just tried what you said. I downloaded the bot and tried both auto-mapping and doing it by hand. Saved it as a custom name like Fullrun.nav and tried web.nav. When using the name web.nav, it even showed a sweet png of the correct area, where a clear path could have been drawn from the picture.

However, it still failed to actually move at all until I went manually ran closer myself. I tried restarting the program several times and switching between the Fullrun.nav and web.nav, even though they are the same file with different names. By looking at the debugger option, it shows a red circle around both traversal nodes, both when trying to walk to the bank and back to the mining site,

Is there anything else I am missing or anything else I could do? Thanks for the quick reply btw, I appreciate it!

Did you select 'CUSTOM' in traversal type?

 

[adenahmed]

Did you select 'CUSTOM' in traversal type?

I did not, but now I did! Set it to Coordinates and Custom_Or_Local and it worked! It went real smooth now! Thank you so much!

The only concern I have is that it runs in the same pattern back and forth. It also runs to the exact same coordinate, which makes sense as it what I have put it as, but would nice if it could perhaps switch up between different rocks within the perimeter. It did that earlier, but that was when it was within that area and less than five squares. Using Custom Web required exact coordinates.

Is there a way to make it go the same route, but without pressing the exact same "tiles" going back and forth? Does changing the "Mouse Path Generator" do anything like this?

You're seriously a helping hand mate. I see how this bot might be trickier than other plug-in and play, but at least you can use this on so many different things once you have learned how to use it! Loving it so far

 

[guyhere]

Hello I recently made a visual rm bot but it’s not working. It’s a small leaping fish bot and if someone can help me go over it I would greatly appreciate it

 

[ziplock1738]

Does anyone know why the dropdown options aren't showing up? I have tried enabling/disabling most of the settings and for the "cast magic on" option I can't get the drop down spell selections to appear.

In other words, hovering the dropdown won't make a Query PopUp appear.
 

Does anyone know why the dropdown options aren't showing up? I have tried enabling/disabling most of the settings and for the "cast magic on" option I can't get the drop down spell selections to appear.

In other words, hovering the dropdown won't make a Query PopUp appear.

Still no update on this? I still can't use any part of this bot that require a Query PopUp

 

[throwawayaccount2]

I have spent so many hours trying to get this to work I just don't get interface conditions. I have asked everywhere, looked at other peoples work, I just dont get why it isnt working. I have determined that Container 129, 4, is the Interface that says "Customisable" in the NMZ Monster selection screen. No matter what I do however it always returns true even without that interface open. I have already tried turning the visible toggle on and off. Can someone explain what Im doing wrong?

 

[atlodar]

Does this bot offer any form of anti-ban support such as mislicks/afk intervals or does it operate under the assumption that since you are creating unique scripts anti-ban is unnecessary (if used within reason ofc)?

 

[monstermadness]

Did you select 'CUSTOM' in traversal type?

Hey, how do i make it interact with Fishing spot?

action: Fish
object: Fishing spot

(etg karamja).

nothing i tried works, and i cant see any documentation on this?
cant find it in devkit.

 

[memer]

Hey, how do i make it interact with Fishing spot?

action: Fish
object: Fishing spot

(etg karamja).

nothing i tried works, and i cant see any documentation on this?
cant find it in devkit.

 

[monstermadness]

View attachment 11174

Thank you. didnt know it was an NPC.


Do you, or anyone know how to make fish barrel empty in bank?

im currently having entity type: inventory, "Open fish barrel" (since its open) as sprite item, and action "Empty" but that (or even Use action) wont do anything. any idea?

i also changed the spirte item to its itemid, but nothing..

 

[adenahmed]

Greetings again! Been creating my own woodcutting bot, but the issue isn't the cutting itself but rather the log drops. Been able to slow down the rate, adjust it so it randomly drops between a set interval etc but the pattern.. The god damn pattern is always the same. From left to right, top to bottom. From a botting perspective its too perfect to even resemble a human-like behavior. Therefore I was wondering if there is a way of randomizing the pattern? Other than that it works fantastic.

Best regards

 

[beerchugga91]

Hi, I am trying to start using this bot, is there a basic tutorial? I can get the bot to start and open the bank but are unable to select something specific to withdraw? Any help would be appreciated.

 

[throwawayaccount2]

PAYING SOMEONE TO TEACH ME TO USE VARBITS! I KNOW EVERYTHING ELSE.

 

[dont get mad]

@tyb51 something broke with yesterdays update on VisualRM.
If you start bot while being logged out, login handler activates and logs account in, but VisualRM doesn't start to work at all (debugging doesn't show any looping).
If you start bot while being logged in, VisualRM starts working and looping like it should. However, if your account loggs out or if u pause the bot for a while, login handler won't work to logg account back in.

 

[throwawayaccount2]

Can we add support for instances, there is no way to get information from instances like move to this tile as the tiles coords are always changing.

 

[tyb51]

tyb51 updated VisualRM [DEV] with a new update entry:

VisualRM [DEV] v1.2.99 Released!

VisualRM [DEV] updated to v1.2.99.

Read the rest of this update entry...