Navigation

Navigation section

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

Sign up now!

Regal Motherlode [Deleted]

Status
Not open for further replies.
R

rockstar2012

Joined
Mar 11, 2018
Messages
9
Hey, any update on this dude?

Tested in few locations and just constantly clicking the furthest away rock.

Used to get 68 before and worked like a dream.

Cheers
 
E

eladanelf

Joined
Jan 27, 2018
Messages
6
Hi there, I use this bot a lot. And I like it but I have had some problems over the weekend that have not occured before.
It runs smooth until the ores are to be collected from the sack. When the last ores should be collected (about 21-25 ores are in the sack) it stays in front of the bank chest without collecting. Only when I pause the bot, collect the ores manually myself it will continue. Than it starts mining again. But it is stuck on collecting. (I use a dragon pickaxe in my inventory, in the case if that matters) I put the log files below:

Around 3:51:00 it gets stuck. Around 4:31:00 I pause the bot and empty the sack manually and it will continue with mining as you can see in the logs.

03:50:48 DEBUG Current Total Sack: 80 | Sack Number: 54 | Actual: 54
03:50:49 DEBUG Current Total Sack: 80 | Sack Number: 54 | Actual: 54
03:50:49 DEBUG Current Total Sack: 80 | Sack Number: 54 | Actual: 54
03:50:49 DEBUG Current Total Sack: 80 | Sack Number: 54 | Actual: 54
03:50:50 DEBUG Current Total Sack: 80 | Sack Number: 54 | Actual: 80
03:50:57 INFO Walking to Bank Area
03:50:57 DEBUG Timed action (WebPath#getNext()) took 336ms
03:50:58 DEBUG [WebPath] Incremented the last successful step index cache to 8.
03:50:59 INFO Walking to Bank Area
03:50:59 DEBUG Timed action (WebPath#getNext()) took 421ms
03:51:00 DEBUG [WebPath] Incremented the last successful step index cache to 8.
03:51:00 INFO Turning Camera to Bank
03:51:09 INFO Walking to Sack Area
03:51:09 DEBUG Timed action (WebPath#getNext()) took 357ms
03:51:10 DEBUG [WebPath] Incremented the last successful step index cache to 9.
03:51:11 INFO Walking to Sack Area
03:51:11 DEBUG Timed action (WebPath#getNext()) took 359ms
03:51:12 DEBUG [WebPath] Incremented the last successful step index cache to 9.
03:51:12 INFO Walking to Sack Area
03:51:13 DEBUG Timed action (WebPath#getNext()) took 364ms
03:51:13 INFO Turning Camera to Sack
03:51:18 INFO Walking to Bank Area
03:51:18 DEBUG Timed action (WebPath#getNext()) took 346ms
03:51:19 DEBUG [WebPath] Incremented the last successful step index cache to 9.
03:51:19 INFO Walking to Bank Area
03:51:20 DEBUG Timed action (WebPath#getNext()) took 381ms
03:51:20 DEBUG [WebPath] Incremented the last successful step index cache to 8.
03:51:21 INFO Walking to Bank Area
03:51:22 DEBUG Timed action (WebPath#getNext()) took 319ms
03:51:22 DEBUG [WebPath] Incremented the last successful step index cache to 5.
04:31:06 INFO Walking to Ladder on Coordinate(3755, 5673, 0)
04:31:08 INFO Walking to Ladder on Coordinate(3755, 5673, 0)
04:31:10 INFO Climbing Up Ladder on Coordinate(3755, 5673, 0)
04:31:15 INFO Mining Ore Vein on Coordinate(3753, 5680, 0)
04:31:16 INFO Mining Ore Vein on Coordinate(3753, 5680, 0)
 
awesome123man

awesome123man

Go check out new bots and give helpful feedback.
Joined
Jan 31, 2016
Messages
5,413
eladanelf said:
Hi there, I use this bot a lot. And I like it but I have had some problems over the weekend that have not occured before.
It runs smooth until the ores are to be collected from the sack. When the last ores should be collected (about 21-25 ores are in the sack) it stays in front of the bank chest without collecting. Only when I pause the bot, collect the ores manually myself it will continue. Than it starts mining again. But it is stuck on collecting. (I use a dragon pickaxe in my inventory, in the case if that matters) I put the log files below:

Around 3:51:00 it gets stuck. Around 4:31:00 I pause the bot and empty the sack manually and it will continue with mining as you can see in the logs.

03:50:48 DEBUG Current Total Sack: 80 | Sack Number: 54 | Actual: 54
03:50:49 DEBUG Current Total Sack: 80 | Sack Number: 54 | Actual: 54
03:50:49 DEBUG Current Total Sack: 80 | Sack Number: 54 | Actual: 54
03:50:49 DEBUG Current Total Sack: 80 | Sack Number: 54 | Actual: 54
03:50:50 DEBUG Current Total Sack: 80 | Sack Number: 54 | Actual: 80
03:50:57 INFO Walking to Bank Area
03:50:57 DEBUG Timed action (WebPath#getNext()) took 336ms
03:50:58 DEBUG [WebPath] Incremented the last successful step index cache to 8.
03:50:59 INFO Walking to Bank Area
03:50:59 DEBUG Timed action (WebPath#getNext()) took 421ms
03:51:00 DEBUG [WebPath] Incremented the last successful step index cache to 8.
03:51:00 INFO Turning Camera to Bank
03:51:09 INFO Walking to Sack Area
03:51:09 DEBUG Timed action (WebPath#getNext()) took 357ms
03:51:10 DEBUG [WebPath] Incremented the last successful step index cache to 9.
03:51:11 INFO Walking to Sack Area
03:51:11 DEBUG Timed action (WebPath#getNext()) took 359ms
03:51:12 DEBUG [WebPath] Incremented the last successful step index cache to 9.
03:51:12 INFO Walking to Sack Area
03:51:13 DEBUG Timed action (WebPath#getNext()) took 364ms
03:51:13 INFO Turning Camera to Sack
03:51:18 INFO Walking to Bank Area
03:51:18 DEBUG Timed action (WebPath#getNext()) took 346ms
03:51:19 DEBUG [WebPath] Incremented the last successful step index cache to 9.
03:51:19 INFO Walking to Bank Area
03:51:20 DEBUG Timed action (WebPath#getNext()) took 381ms
03:51:20 DEBUG [WebPath] Incremented the last successful step index cache to 8.
03:51:21 INFO Walking to Bank Area
03:51:22 DEBUG Timed action (WebPath#getNext()) took 319ms
03:51:22 DEBUG [WebPath] Incremented the last successful step index cache to 5.
04:31:06 INFO Walking to Ladder on Coordinate(3755, 5673, 0)
04:31:08 INFO Walking to Ladder on Coordinate(3755, 5673, 0)
04:31:10 INFO Climbing Up Ladder on Coordinate(3755, 5673, 0)
04:31:15 INFO Mining Ore Vein on Coordinate(3753, 5680, 0)
04:31:16 INFO Mining Ore Vein on Coordinate(3753, 5680, 0)
Click to expand...
Sorry I've been out of it for a little while. I'll try to look into it today :)
 
O

omgdudeok

Joined
Feb 4, 2018
Messages
9
Often spam clicks areas walking back and forth and won't mine the rockfall to pass it. Looks very bot like so unfortunately I can't use it any further, but I look forward to updates to get it in great working shape! :D
 
Z

zenerd

Joined
Mar 22, 2018
Messages
16
Still gets stuck on rockfalls unfortunately, specifically tried on inner west. Hopefully can get fixed cause this seems like a great script!
 
B

bg1234

Joined
Sep 11, 2017
Messages
13
I've got the same issue. Its very strange, this hasnt happened before. I really like the quality of your bot awesome123man, please update so we can continue to use it :)
 
wesmat9

wesmat9

Joined
Nov 6, 2015
Messages
32
Hey, i know your trying to figure the pathing thing out but i ran the bot 2 nights in a row now and for some reason both nights after about an hour into running the bot it got stuck at the water wheel just standing there for about 5 hours. The first night i figured it was just bad luck but 2 nights in a row now it has happened.
 
awesome123man

awesome123man

Go check out new bots and give helpful feedback.
Joined
Jan 31, 2016
Messages
5,413
wesmat9 said:
Hey, i know your trying to figure the pathing thing out but i ran the bot 2 nights in a row now and for some reason both nights after about an hour into running the bot it got stuck at the water wheel just standing there for about 5 hours. The first night i figured it was just bad luck but 2 nights in a row now it has happened.
Click to expand...
I'll try to fix it this weekend. Currently swamped
 
H

hamtaro

Joined
Feb 8, 2018
Messages
4
Any option to just drop gems? It keeps the gem throughout runs, reducing the number of rocks it can mine.

Consistently gets stuck at North West rockfall, keeps trying to click the second rockfall rather than the closest one. Same with South east.

Currently running at South West since it only takes 1 rock to pass to the area and working fine.
 
awesome123man

awesome123man

Go check out new bots and give helpful feedback.
Joined
Jan 31, 2016
Messages
5,413
Hamtaro said:
Any option to just drop gems? It keeps the gem throughout runs, reducing the number of rocks it can mine.

Consistently gets stuck at North West rockfall, keeps trying to click the second rockfall rather than the closest one. Same with South east.

Currently running at South West since it only takes 1 rock to pass to the area and working fine.
Click to expand...
yes i am aware of the bug causing it to get stuck. The fix has been awaiting approval for 2 days.
 
Status
Not open for further replies.
Top