[geashaw]

Also if you use legacy interface, make sure your chat always says 'Press Enter to Chat' otherwise it will keep spamming 1 in the chat.

My bot got stuck because the inventory was in the way of the light incenser, but fixed that by disabling legacy interface and moving the inventory to a different area. Now it works like a charm, cheers for the bot!

These are the things I don't think about since I usually play the way you are just writing.

 

[kyler1994]

Are you sure you have the ring in slot one. Oops, I changed that, sorry!

Ring should be slot one, teleport tablet should be slot two.

that fixed it! haha, sorry the picture didn't load on my phone!

 

[auxi]

These are the things I don't think about since I usually play the way you are just writing.

Yep I figured as much. Good thing is that the user can improvise and fix these things with how RS3 interfaces work
 
Forgot to say I got 95 prayer with this bot after about 1-2 days. Completely flawless, thanks a lot!

 

[chowie420]

Does it still only work with d bones?

 

[geashaw]

Does it still only work with d bones?

It shouldn't, give it a try!

 

[devphreak]

Will this get an update for foh? I don't have an altar :/

 

[geashaw]

Will this get an update for foh? I don't have an altar :/

I'm sorry, no. Already got my own prayer to 95. Decided to share it, with maintenance fixes only.

 

[69littleranger420]

How did you guys get this working?

Looks incredible but so far hasn't worked.

If I start anywhere but in my house then it just idles and does nothing, so when I try and run it in my house then all it does is clicks light the burners (even though door is closed so it can't reach them). Then, once I open the door for it, it lights burners and offers all bones but once inventory is used up it just idles?

Everything is in the exact right place, the preset is identical, ring slot 1 and tab slot 2.

Any tips? I would LOVE for this to work.

Proof of setup: Gyazo - 540c78d84ee3697c07c51f6011df37a5.png

 

[auxi]

In your house settings you can enable so doors are always open.

Also try placing your ring of kinship in the second actionbar slot.

 

[69littleranger420]

In your house settings you can enable so doors are always open.

Also try placing your ring of kinship in the second actionbar slot.

A ring of kinship? That isn't used in the set up? Do you mean the Tokkul ring because if so, I have already tried that and it did not work.

Even when I aid it by clicking the ring, it uses option 4 and teleport to the middle of TzHar City and then just stands there and doesn't bank?

 

[auxi]

A ring of kinship? That isn't used in the set up? Do you mean the Tokkul ring because if so, I have already tried that and it did not work.

Even when I aid it by clicking the ring, it uses option 4 and teleport to the middle of TzHar City and then just stands there and doesn't bank?

Yeah sorry I meant the tzhaar ring.

And idk then, it worked flawlessly for me about a week ago. Try experimenting with different setups. I believe it's supposed to use option 4? Pretty sure that's the option it used for me as well, it tele'd me right next to a bank.

edit: I checked the wiki and apparently there's another option on the ring after completing Brink of Extinction. Have you done this quest?

 

[69littleranger420]

Nope, I haven't done brink of extinction and don't have the levels for it yet sadly :/

 

[geashaw]

How did you guys get this working?

Looks incredible but so far hasn't worked.

If I start anywhere but in my house then it just idles and does nothing, so when I try and run it in my house then all it does is clicks light the burners (even though door is closed so it can't reach them). Then, once I open the door for it, it lights burners and offers all bones but once inventory is used up it just idles?

Everything is in the exact right place, the preset is identical, ring slot 1 and tab slot 2.

Any tips? I would LOVE for this to work.

Proof of setup: Gyazo - 540c78d84ee3697c07c51f6011df37a5.png

Let me check tomorrow. The ring and house tablet should be in your actionbar, check. You should have your banking preset (one or two, can't remember) set to include a house tab, two clean marrentills and the rest bones (of any kind). Then I'd suggest you start the bot at the fight kiln bank.

Be sure to have your building to have the doors open, and you arrive at the portal inside.

Ps. Brinkof Extinction is not needed.

 

[69littleranger420]

What do you mean by arrive at the portal inside?

Can you set it so that your tab teleports you directly into the house?

 

[geashaw]

What do you mean by arrive at the portal inside?

Can you set it so that your tab teleports you directly into the house?

You can change where you arrive, which should be inside your house.

 

[69littleranger420]

Okay yeah, I will try this, and as for the bank preset, I have it all setup EXACTLY like your pictures show.
 
I did everything you recommended and it still just idles after doing a single inventory... :/

What can I do? I need this bot so badly!

EDIT: It seems to be WORKING! It also idles for like 20seconds in between tasks though, for example after it has teled to fight kiln bank it will wait for about 10-15 second before clicking bank, is this meant to happen?
 
Yeah the idle times in between tasks at various points are a bit of a joke lol, the script lit the burners and idled for so long they went out before inventory was finished ahaha >.<

Lmk if there is a workaround for this <3

But wicked otherwise - thank you!!!
 
Do we know if there is anyway to stop the bot taking 20 second breaks sporadically at random points between tasks?

 

[auxi]

Honestly it is probably your computer. Try updating Java or something. I ran the bot on my old media machine and it was very fast for me.

 

[geashaw]

Honestly it is probably your computer. Try updating Java or something. I ran the bot on my old media machine and it was very fast for me.

Thank you. For me as well

 

[69littleranger420]

I'm running on a maxed out MacBook Pro 2015, maybe it's just the OS?

It works smoothly sometimes...

 

[auxi]

Hmm yeah, it could be some sort of problem with OS X. I run the bot on a 2011 Mac mini, but I've installed Windows on it. You could maybe try Bootcamping or installing a Windows OS on a virtual machine and see if that works. Or if you have a different computer you could use that instead to save all the trouble.

Hope you can get it fixed.