Tombs of Amascut Mate
- Joined
- Jan 22, 2025
- Messages
- 1
any information on gear requirements etc?
- Joined
- Mar 18, 2016
- Messages
- 2
Great bot, was able to do a 500 on the iron with a fang, bofa, yellow keris and a dream. Have to have an idea of how to do toa and what each evo does. had to mess with evos till i got it where it worked for me, now doing 430s easyly with occasional wipe on ahaka if special ends right as dps check happens. Only suggestion is if you could choose how much spec to use on p2 wardens orb. Have to 4 down but with 1 dds spec it would 3 down. but if i turn on spec ill die because not enough spec energy to keris. For all the people having issues, mess with evos, get yellow keris dont bring food, and dont spec to do dmg other than baba and kephri. Also keep back is a bad time if you dont have light bearer and yellow keris same with ancient haste.
Last edited:
- Joined
- Jul 6, 2023
- Messages
- 2
same, i think it's failing to enable rigor properly sometimes, and no destroying weak boulder.
I started taking a ring switch for blowpipe switch and i haven't been failing i since.
- Joined
- Feb 17, 2025
- Messages
- 3
Banned after 150 or so runs over about 2 weeks. I overdid it and likely got flagged. No worries though, bot is amazing, and as long as you don't do what I did, you're prob fine.
interesting ill try it
Actually same issue here, I must eat manually so It wount die.
Edit: nvm, fixed by changing settings.
Last edited:
- Joined
- Jul 6, 2023
- Messages
- 2
W script! One thing I wish I could change though…
I’d really like to stop the 1-tick gear switch from happening in the lobby.
Here’s what’s going on:
I recently got the BGS spec function working (huge W), though it doesn’t work properly with the ornament kit. During the final Warden phase (currently labeled as P3 in the options, though I think that’s actually P4—but not a big deal)...
The script correctly switches to BGS, specs, then goes back into my DPS gear (max mage setup). Everything works great during the raid.
The issue:
After the Warden dies and I’m in the treasure room, the script switches back into BGS gear. Then, when I leave the raid, it 1-tick swaps back into my mage gear—in the lobby.
I’d really prefer if it didn’t 1-tick gear swap in the lobby. Ideally, it could just leave me in whatever gear I finish the raid in. Or maybe there could be an option to end and start the raid in a specific gear setup—would be super useful for something like starting in Fang + Defender to save an inventory slot instead of holding Shadow when entering.
I’d really like to stop the 1-tick gear switch from happening in the lobby.
Here’s what’s going on:
I recently got the BGS spec function working (huge W), though it doesn’t work properly with the ornament kit. During the final Warden phase (currently labeled as P3 in the options, though I think that’s actually P4—but not a big deal)...
The script correctly switches to BGS, specs, then goes back into my DPS gear (max mage setup). Everything works great during the raid.
The issue:
After the Warden dies and I’m in the treasure room, the script switches back into BGS gear. Then, when I leave the raid, it 1-tick swaps back into my mage gear—in the lobby.
I’d really prefer if it didn’t 1-tick gear swap in the lobby. Ideally, it could just leave me in whatever gear I finish the raid in. Or maybe there could be an option to end and start the raid in a specific gear setup—would be super useful for something like starting in Fang + Defender to save an inventory slot instead of holding Shadow when entering.