[garlicnonion]

The least we can do is wait patiently though, this bot is free and in my opinion one of the best RM has to offer.

For now im using Maxi Woodcutter set to custom cut Teaks at Tai bwo, i suggest anyone else to do the same.

 

[flabbyman]

Hi Mate. This bot is beautiful, here is a proggy (this was ran straight from 41 WC with a rune axe to the end of session, so expect better rates with Dragon Axe + Higher levels).

Just a tip to future users, I had an issue using these Prime 3T Scripts when i was not using my home world's. The world lag caused the bot to use up the herbs. I ran this entire session without using 1 herb. SO make sure you use a local world.

 

[fallschirmjagar]

Not sure why, but every 3-tick bot drops all herbs except one, then as soon as the herbs on the ground disappear, it finished the herb tar process and logs out because the bot doesn't have the proper 3-tick ingredients. Not sure why the bot thinks is should drop any extra herbs, didn't used to do that.

 

[flabbyman]

Not sure why, but every 3-tick bot drops all herbs except one, then as soon as the herbs on the ground disappear, it finished the herb tar process and logs out because the bot doesn't have the proper 3-tick ingredients. Not sure why the bot thinks is should drop any extra herbs, didn't used to do that.

Hey bro, i was an egg and had same issue. you NEED spare grimy herbs, NOT clean. I believe this is what makes 3T possible(need only 1 herb) but I could be wrong. But anyway, just bring 1 clean, & 5 or so grimy. Good luck with your gains brother, hope this helps.

Also do make sure you are in your Local/Home worlds, as the ping will cause you to lose herbs, also good internet is required. From my experiences it either doesn't lose a single herb, or it loses all 6 in quick succession, due to bad ping either from poor servers, not home world, 'net issues. so sometimes having many spare 3T items doesn't help to much, but definitely worth bringing.

 

[botting097]

Perm banned received on a main 119 account, which has only ever botted NMZ 5 weeks ago for three days. Clean IP address, never been banned. A second account of mine has been using many different scripts on runemate and different platforms to test, never been flagged. Was using to train WC to 71 for quest cape (legit 203 QP as well).

I baby sat the bot all throughout. Was ran for 6 hours and 11 mins before the ban. Breaks were set to be made between 15-35 mins for 10-15 mins due to the nature of many clicks. Usually I set breaks after an hour of running if it’s not click intense. Also paused the client for an hour whilst I did some GE exchanges and farming runs. So in reality, bot was only running for 2-3 hours. Such a shame.

 

[crypsis]

Tried 15 minutes, used over 20 herbs! Wasnt working very well and i guess you will be quick banned for using this bot. Maybe an update soon?!

 

[savior]

Savior updated Prime 3T Woodcutting BETA with a new update entry:

Prime 3T Woodcutting BETA v0.0.9 Released!

Prime 3T Woodcutting BETA updated to v0.0.9.

Read the rest of this update entry...

 

[savior]

Savior updated Prime 3T Woodcutting BETA with a new update entry:

Prime 3T Woodcutting BETA v0.0.10 Released!

Prime 3T Woodcutting BETA updated to v0.0.10.

Read the rest of this update entry...

 

[hig]

Used this to get the majority of my 99 woodcutting, I think it's the best bot for powerleveling woodcutting on this site. I started off with a paid bot, and ended up using this. 100k xp/ph with tick manipulation compared to 60k xp/ph with out.

I initially tried it and found it was using the herbs really fast and assumed it was to do with runemate not detecting game ticks, however I discovered that if you use it on a low ping world, it only uses about 1 herb per hour. So if you take 22 herbs with you, you can bot for over 20 hours with out banking.

 

[defeat3d]

Defeat3d updated Prime 3T Woodcutting BETA with a new update entry:

Efficient 3 Tick Woodcutter v1.0.0 Released!

Efficient 3 Tick Woodcutter updated to v1.0.0.

Read the rest of this update entry...

 

[11kab11]

Getting lower XP/H than just afk'ing. Not sure what im doing wrong. Does the axe have to be unequipped?

 

[dirtmcgirtus]

this might be a noob question but whats the inventory index setting and how does it work, i think thats the problem. Whenever i start the bot an error appears saying i dont have nay 3 tick items, i have the same layout as the example so not sure why , ty

 

[gertjan boo]

This script is broken atm. The tick cycle is too fast, making u gain 0 exp per hour. Restarted this like 4-5x to retest, losing me some money in the proces. Maybe this can get looked into?

 

[restarted]

Any plan on updating this?

 

[defeat3d]

Any plan on updating this?

updating what exactly?

 

[restarted]

updating what exactly?

I don't know if it is me doing something wrong but the exp rates I am getting are no where near 110k, usually 75-80k tops. Using D axe in hardwood grove in lowest ping world possible.

 

[defeat3d]

I don't know if it is me doing something wrong but the exp rates I am getting are no where near 110k, usually 75-80k tops. Using D axe in hardwood grove in lowest ping world possible.

have you tried increasing your mouse multiplier in runemate settings? might help a little

 

[restarted]

have you tried increasing your mouse multiplier in runemate settings? might help a little

I will give that a shot tonight and let you know, thank you for the response!
 

have you tried increasing your mouse multiplier in runemate settings? might help a little

Could you show me recommended settings, I've increased multiplier to max and now it's getting 70k/h max at teaks with 83 wc and d axe + spec

 

[defeat3d]

I will give that a shot tonight and let you know, thank you for the response!
 

Could you show me recommended settings, I've increased multiplier to max and now it's getting 70k/h max at teaks with 83 wc and d axe + spec

no settings recommendations from me

make sure you have sufficient fps (stable above 40) and a stable, low latency connection

 

[restarted]

no settings recommendations from me

make sure you have sufficient fps (stable above 40) and a stable, low latency connection

Ran for a bit with 95k ish per hour, couldn't find a world with 95% stability and then made all tars at once. Will give it another go if I find a solid world

*Update ; ran this and nothing else on a stable world and got between 105-125k for a few hours no issues.