[savior]

When you want to run more than 2 RuneScape clients simultaneously on one machine, the client will fail to load if there are already 2 clients running. To prevent that, you need to start all clients at once in a very short amount of time, but even that begins to be tricky if you want to run quite more than just 3 or 4 clients.

To clarify, this is a limitation at Jagex's end, not RuneMate.

I wrote a small batch script (Windows only) which will help you start a salve of clients at once.

Run the file and enter the game mode and amount of clients you would like to start.

Spoiler: Source

Save the following code as a .bat file

@echo off


:GAMETYPE_SETUP
SET /P gametype="Gametype (rs3/osrs): "
IF /I "%gametype%" == "rs3" GOTO AMOUNT_SETUP
IF /I "%gametype%" == "osrs" GOTO AMOUNT_SETUP
GOTO INVALID_GAMETYPE


:AMOUNT_SETUP
SET /P input="Amount of clients: "
SET /A amount="%input%"*1
IF %amount% GTR 0 GOTO RUN
GOTO INVALID_AMOUNT


:INVALID_GAMETYPE
ECHO Invalid input
GOTO GAMETYPE_SETUP

:INVALID_AMOUNT
ECHO Invalid input
GOTO AMOUNT_SETUP


:RUN
FOR /L %%i IN (1, 1, %amount%) do (
    IF /I "%gametype%" == "rs3" (
        START jagex-jav://runescape.com/jav_config.ws
    ) else (
        START jagex-jav://oldschool1.runescape.com/jav_config.ws
    )
)

 

[mercurial003]

If this works i'll give you a hug and say sorry for the bad words i addressed you.

I just realized i don't know to edit it (facepalm)

 

[savior]

Sorry Savior, i tought was you posting.

No problem bro. The script working for you?

 

[mercurial003]

One friend tested it and it's working.

 

[lbirdcali]

When you want to run more than 2 RuneScape clients simultaneously on one machine, the client will fail to load if there are already 2 clients running. To prevent that, you need to start all clients at once in a very short amount of time, but even that begins to be tricky if you want to run quite more than just 3 or 4 clients.

I wrote a small batch script (Windows only) which will help you start a salve of clients at once.

Run the file and enter the game mode and amount of clients you would like to start.

Spoiler: Source

Save the following code as a .bat file

@echo off


:GAMETYPE_SETUP
SET /P gametype="Gametype (rs3/osrs): "
IF /I "%gametype%" == "rs3" GOTO AMOUNT_SETUP
IF /I "%gametype%" == "osrs" GOTO AMOUNT_SETUP
GOTO INVALID_GAMETYPE


:AMOUNT_SETUP
SET /P input="Amount of clients: "
SET /A amount="%input%"*1
IF %amount% GTR 0 GOTO RUN
GOTO INVALID_AMOUNT


:INVALID_GAMETYPE
ECHO Invalid input
GOTO GAMETYPE_SETUP

:INVALID_AMOUNT
ECHO Invalid input
GOTO AMOUNT_SETUP


:RUN
FOR /L %%i IN (1, 1, %amount%) do (
    IF /I "%gametype%" == "rs3" (
        START jagex-jav://runescape.com/jav_config.ws
    ) else (
        START jagex-jav://oldschool1.runescape.com/jav_config.ws
    )
)

I'd like to open 3 rs3 clients without the 'unable to create advertising' error.

So far my notepad file looks like this:

@echo off
:GAMETYPE_SETUP
SET /P gametype="rs3"
IF /I "%gametype%" == "rs3" GOTO AMOUNT_SETUP
IF /I "%gametype%" == "osrs" GOTO AMOUNT_SETUP
GOTO INVALID_GAMETYPE
:AMOUNT_SETUP
SET /P input="3"
SET /A amount="%input%"*1
IF %amount% GTR 0 GOTO RUN
GOTO INVALID_AMOUNT
:INVALID_GAMETYPE
ECHO Invalid input
GOTO GAMETYPE_SETUP
:INVALID_AMOUNT
ECHO Invalid input
GOTO AMOUNT_SETUP
:RUN
FOR /L %%i IN (1, 1, %amount%) do (
    IF /I "%gametype%" == "rs3" (
        START rs-launch://www.runescape.com/k=5/l=$(Language:0)/jav_config.ws
    ) else (
        START jagex-jav://oldschool1.runescape.com/jav_config.ws
    )
)

There are spaces of course in my notepad, exactly where you mention ie: nothing on lines 2,3,9,10 etc.

I'm spent some time on YouTube and Google trying to figure this out before bugging you.

When I start the .bat file, all i get is this image (attached).

Any character I enter, gives me 'invalid input' message.

Basically, I'm trying to get each computer to run min 4 game clients.

I can use a basic .bat file to open 3 quickly, but Runemate cannot find any of the clients. Under bot>account>client, client is simply blank. Only seems to respond when I open RS3 through Runemate

Any help would be greatly appreciated.

Thanks

 

[savior]

W

I'd like to open 3 rs3 clients without the 'unable to create advertising' error.

So far my notepad file looks like this:

@echo off
:GAMETYPE_SETUP
SET /P gametype="rs3"
IF /I "%gametype%" == "rs3" GOTO AMOUNT_SETUP
IF /I "%gametype%" == "osrs" GOTO AMOUNT_SETUP
GOTO INVALID_GAMETYPE
:AMOUNT_SETUP
SET /P input="3"
SET /A amount="%input%"*1
IF %amount% GTR 0 GOTO RUN
GOTO INVALID_AMOUNT
:INVALID_GAMETYPE
ECHO Invalid input
GOTO GAMETYPE_SETUP
:INVALID_AMOUNT
ECHO Invalid input
GOTO AMOUNT_SETUP
:RUN
FOR /L %%i IN (1, 1, %amount%) do (
    IF /I "%gametype%" == "rs3" (
        START rs-launch://www.runescape.com/k=5/l=$(Language:0)/jav_config.ws
    ) else (
        START jagex-jav://oldschool1.runescape.com/jav_config.ws
    )
)

There are spaces of course in my notepad, exactly where you mention ie: nothing on lines 2,3,9,10 etc.

I'm spent some time on YouTube and Google trying to figure this out before bugging you.

When I start the .bat file, all i get is this image (attached).

Any character I enter, gives me 'invalid input' message.

Basically, I'm trying to get each computer to run min 4 game clients.

I can use a basic .bat file to open 3 quickly, but Runemate cannot find any of the clients. Under bot>account>client, client is simply blank. Only seems to respond when I open RS3 through Runemate

Any help would be greatly appreciated.

Thanks
View attachment 2005 View attachment 2006

why are you editing the script lol

 

[lbirdcali]

W
why are you editing the script lol

Hahah gotcha. Works perfectly. Greatly appreciated!

 

[ovdeez]

Hey, finally found this thread!

But It's not letting me save the file as a .bat on this PC in notepad or any of the other text programs I have.

Can someone post a file that yall already made in that format pleaseeee.

Thank you

 

[gengsta]

Hey, finally found this thread!

But It's not letting me save the file as a .bat on this PC in notepad or any of the other text programs I have.

Can someone post a file that yall already made in that format pleaseeee.

Thank you

Open in notepad and use "File" > "Save as..."
And then at the bottom you'll see something like .txt or "textfile", change that to all files and then save!

 

[ovdeez]

ahh ok lemme try that, thanks

 

[american express]

Hey, finally found this thread!

But It's not letting me save the file as a .bat on this PC in notepad or any of the other text programs I have.

Can someone post a file that yall already made in that format pleaseeee.

Thank you

Make sure you have selected "All Files" under save type.

 

[gengsta]

Make sure you have selected "All Files" under save type.

That's exactly what I meant, ty for resolving. Can't create image tutorials on the phone smh

 

[shadowhunter]

Wow, this is absolutely amazing. Takes 2 seconds so setup and works like a charm.

Thank you a million

Wish I would've know about this from the start lol

 

[s cript]

So nice.

 

[scyther808]

What if I wanted to start it in Portuguese? I've been trying to figure this out all day lol

 

[savior]

What if I wanted to start it in Portuguese? I've been trying to figure this out all day lol

You would have to change that in the client settings

 

[light616]

I was getting so angry i kept getting this error like feminist rights activist triggering levels and thanks to you im no longer frustrated thanks so much man you are the real mvp

 

[tobias12321]

Is there a way to put a proxy address in the script? I used to do this with Proxycap on different JagexLauncher.exe but I can't start more than 2 obviously lol

 

[savior]

Is there a way to put a proxy address in the script? I used to do this with Proxycap on different JagexLauncher.exe but I can't start more than 2 obviously lol

Not really, maybe try Proxifier?

 

[tobias12321]

Not really, maybe try Proxifier?

I will try now, I used ProxyCap before. So gotta try Proxifier